Wireless Antenna Selection and Etiquette

December 6, 2017 by Ben Stowe, CTS

One of the challenges with reliable wireless signal transmission is that it’s invisible, so it’s difficult to see issues. Even solid, quality radios can be handicapped by poor antenna selection or placement.

One critically key element is to provide a line of sight connection between your transmitting and receiving antennas whenever possible. Basically, you should have a clear path between those antennas as much as possible. Two things that dramatically affect radio waves are metal and water. People don’t like it when point this out, but we are essentially giant walking bags of water. It varies from person to person, but on average we are 60% water by weight. Try to limit the number of people and metal surfaces between your antennas.

Also, it’s important to choose the best antenna for the job. Most wireless systems ship with ¼ wave antennas (about 6” in length for a UHF system). These are monopoles, and as such require the ground plane from the receiver chassis. The most important take-away from this is that these antennas should not be remotely mounted, which means achieving line-of-sight can be harder.

A larger “stick” shaped antenna, called a ½ wave dipole can be used and this provides a couple meaningful benefits. The first of which is that they can be remotely mounted and do not have to be attached to the receiver’s ground plane. The second is that they have greater antenna gain and provide a stronger signal from the radiated energy of the transmitter.

Even better yet is a directional antenna, called a Log Periodic (LPA), sometimes also referred to as a shark fin or batwing antenna. These are made up of an array of antennas on a solid surface that increases antenna gain in one direction, while not another. This allows us to focus our reception towards our transmitter while reducing the likelihood of interference from areas we don’t’ need coverage. These can be mounted on stands to get them up high to provide excellent line-of-sight also.

Ben Stowe, CTS Ben Stowe, CTS (26 Posts)

Ben’s love of electronics and technology led to years of schooling in Electricity, Electronics, Robotics and Lasers. Ben supported himself through school by building and selling strobe lights and other electronic devices. He built his first DJ show largely from scratch and scrap, often repairing broken items others had thrown away because he could not afford to buy new equipment. He holds a Minnesota electrical license, and his AV installs have been featured in almost every major industry trade magazine. His relentless passion for education has led to a number of other certifications and accreditations, including the most widely recognized one in the AV industry, the InfoComm CTS. His love for education inspired him to begin the ProAcademy educational sessions, focused on increasing understanding of AV technologies within the industry. Ben has been involved in a number of technical writings, lectures, presentations, as well as research and development assistance with a number of manufacturers for products, industry wide. He is also a regular contributing author to industry magazines in the United States and Europe. Ben’s presentations have been featured across the world both as a part of industry leading trade shows, and as a presenter for various groups and functions. Some of these events include BPM in the United Kingdom, Mobile Beat, the ADJA National Convention, Wedding MBA, and a national tour as a headlining presenter for an industry magazine. The United States Armed Forces branches have also called upon Ben to provide engineering and training assistance. His highly informational, slightly nerdy and always funny presentation style have made him a favorite at events, while his sincere desire to help people with their application of technology have made him a favorite with them after the event. Ben serves the industry as the President of NLFX Professional, an industry leading supplier of sound, lighting and video systems, a role he has maintained since founding the company in 1993.

Filed Under: Exclusive Online News and Content