Ben Stowe, CTS


Ben Stowe, CTS

Ben’s love of electronics and technology led to years of schooling in Electricity, Electronics, Robotics and Lasers. Ben supported himself through school by building and selling strobe lights and other electronic devices. He built his first DJ show largely from scratch and scrap, often repairing broken items others had thrown away because he could not afford to buy new equipment. He holds a Minnesota electrical license, and his AV installs have been featured in almost every major industry trade magazine. His relentless passion for education has led to a number of other certifications and accreditations, including the most widely recognized one in the AV industry, the InfoComm CTS. His love for education inspired him to begin the ProAcademy educational sessions, focused on increasing understanding of AV technologies within the industry. Ben has been involved in a number of technical writings, lectures, presentations, as well as research and development assistance with a number of manufacturers for products, industry wide. He is also a regular contributing author to industry magazines in the United States and Europe. Ben’s presentations have been featured across the world both as a part of industry leading trade shows, and as a presenter for various groups and functions. Some of these events include BPM in the United Kingdom, Mobile Beat, the ADJA National Convention, Wedding MBA, and a national tour as a headlining presenter for an industry magazine. The United States Armed Forces branches have also called upon Ben to provide engineering and training assistance. His highly informational, slightly nerdy and always funny presentation style have made him a favorite at events, while his sincere desire to help people with their application of technology have made him a favorite with them after the event. Ben serves the industry as the President of NLFX Professional, an industry leading supplier of sound, lighting and video systems, a role he has maintained since founding the company in 1993.




>
Read

Cheating death as a DJ

July 12, 2017 by Ben Stowe, CTS
This might be one of those times where you might be tempted to kill the messenger, but the irony is that I’m trying to keep you from killing yourself. Literally. Just about everybody who works in the sound industry has seen (and used) the 3 prong to 2 prong electrical adaptors, often called “Cheater Plugs”. More often than not, they were not used for their intended purpose, but instead for a dangerous and illegal one in lifting the electrical safety ground. Usually when this is the case, they are employed as a Hail Mary effort to eliminate a hum, often caused by a ground loop. Eliminate the ground, eliminate the ground loop. However, in solvin... [read more]
>
Read

Subwoofer Placement

June 28, 2017 by Ben Stowe, CTS
One of the great quandaries for a DJ is where to place their subs. Often there is no clear right answer as several factors must be considered. Often we must weigh aesthetics, architectural allowances, desired output and coverage and room acoustics. Acoustics and wave propagation can often confuse people, and maybe primarily because sound waves are invisible. We’ll start very simple and make some of these things visible with the help of EV LAPS 3.37, which is an acoustic modeling program. It assumes a purely anechoic environment, that is to say that the room plays no role in the measurement. We are simply predicting the interaction between known speakers at given frequencies. The stage size is 40 wide by 20 deep, and that is really just to illustrate spacing better. We are going to model 270 degrees of... [read more]
>
Read

Selecting a microphone for the right reason…it’s pattern!

June 14, 2017 by Ben Stowe, CTS
When selecting a microphone it’s important to understand the various pick-up patterns and how which will perform best in your application. Let’s look at the 3 most common for DJ use. Cardioid. So named for it’s “heart shaped” pattern, this pickup pattern is most sensitive on-axis, meaning looking straight down into the top of the microphone, and begins to taper off as you get off-axis, or moving towards the side. It has maximum rejection completely off-axis, which can be very useful in situations where you have monitors or other high ambient sound levels. This means the mic will pick up the person speaking or singing directly int... [read more]
>
Read

No Peaking – WHY to not crank it!

May 31, 2017 by Ben Stowe, CTS
Most of us are familiar with the complimentary lightshow audio equipment like mixers, and amplifiers provide. How exciting and pleasing it is to see colored LEDs (typically a stoplight variety of green, amber and red, but sometimes more creatively colored) bouncing up and down as we rock the dancefloor. For those with vintage tastes, a needle on an analog VU meter serves the purpose. But besides pleasing our inner geek, what are those lights there for? It takes a little more inner geek to wrap our heads around it. Typically, these meters represent “VU” (Volume Units) or “dBU”, which is a voltage ratio reference. For those that want to toss and turn a little tonight, here’s the geekery. A value of “0” in VU is defined as one milliwatt (mW) of power cycling at 1000 Hz flowing across 600 ohms... [read more]
>
Read

Active or Passive Speakers

May 17, 2017 by Ben Stowe, CTS
Fundamentally the question really is, where do you want your amp? A passive loudspeaker must be connected to an amplifier, whereas an active loudspeaker has an amplifier built into the enclosure of the speaker. Each has it’s pros and cons. You are still carrying an amplifier with an active speaker (it’s just now inside the speaker). Also with an active speaker, you run 2 cables instead of one (audio signal, and another for AC power). So, which is right for you? Well, the convenience of having an amplifier built into the loudspeaker can be really nice. It allows each loudspeaker to be used and placed independently, whereas... [read more]
>
Read

Can you use a mic cable to run a DMX signal? The short, and only correct answer is “no”.

May 3, 2017 by Ben Stowe, CTS
Can you use a mic cable to run a DMX signal? The short, and only correct answer is “no”. Here are the physics. A DMX signal is a digital signal comprised of 1s and 0s being transmitted at a rate of roughly 250,000 per second. Each piece of binary data must remain legible to the receiving end, or the data is no longer useful. 1s must remain 1s and 0s must remain 0s, and they must arrive with the correct timing. Thus, a cable is designed with the electrical characteristics ideal for this type of signal (capacitance and impedance most notably) and it then must be properly protected with appropriate shielding. This does not mean that a DMX cable is superior and should then be used for both DMX and analog audio. Here again, analog audio cables are designed with the best set of electrical characteristics ... [read more]
>
Read

The Moving Line in the Sand

August 15, 2016 by Ben Stowe, CTS
We all have a line in the sand, and sometimes we move it around to suit our given position. I’ve noticed a lot of this within the DJ industry lately. On one hand, a DJ might post a picture of a competitor’s set-up on an industry forum, and do so for the purpose of mocking the inferiority of it. Then, in the next post he will take offense when someone recommends doing something superior to what he’s doing with his own setup.172-2627 It’s caused me to think a bit about the qualifier, “just fine.” They say, “I do this and it’ s just fine.” Just fine for whom? Just fine for you? Just fine for your clients? What if what the “inferior” DJ is doin... [read more]
>
Read

The DJ of 2025

July 16, 2016 by Ben Stowe, CTS
As I began to research for this article, I thought it would be fun to see how others had fared with predictions of the future. Being a geek, I’ve logged 171-odyssey-stowemy share of time watching sci-fi, and often life imitates art. Star Trek’s PADDs (Personal Access Display Devices) are essentially a reality with today’s iPads and tablets, and with the discovery of the Higgs Boson particle, teleportation has taken another step towards reality. Jules Verne’s Nautilus was a big stretch in 1870 when 20,000 Leagues Under the Sea was written, yet less than a century la... [read more]
>
Read

Back…to the Future

June 26, 2016 by Ben Stowe, CTS
It was more than 20 years ago that I first set up a sound system with the expectation of a paycheck at the end of the night. In fact, my career very closely mirrors the life of the print edition of Mobile Beat Magazine. As a young, starry-eyed DJ it would have never occurred to me that today I would be writing an article for the last print edition of the magazine. It would have been difficult to stoweunderstand how the emerging internet of the ‘90s would change the way we consume information and effect the existence of magazines. Likewise, it would be difficult to have predicted the evolution of technology that we use as DJs. Ironic, perhaps, that during the past... [read more]
>
Read

Ben Stowe’s DJ Toolbox Essentials

March 31, 2015 by Ben Stowe, CTS
[ The following is an excerpt from the current DJ Toolbox feature in issue #162. For the rest of the DJs' featured, get a copy of MB #162, or check it out online. ] DJToolboxThey say the only tool you will miss is the one you don’t bring. Of course, bringing everything simply isn’t practical, so a reasonable balance must be found to be well equipped, and yet portable. I understand the struggle. I am frequently traveling to places that I am not intimately familiar with to work with a variety of different technologies, and more often than not I am flying there.... [read more]